Attainment of Brown Adipocyte Features in White Adipocytes of Hormone-Sensitive Lipase Null Mice

BACKGROUND: Hormone-sensitive lipase (HSL) is expressed predominantly in adipose tissue, where it plays an important role in catecholamine-stimulated hydrolysis of stored tri- and diglycerides, thus mobilizing fatty acids. HSL exhibits broad substrate specificity and besides acylglycerides it hydrolyzes cholesteryl esters, retinyl esters and lipoidal esters. Despite its role in fatty acid mobilization, HSL null mice have been shown to be resistant to diet-induced obesity. METHODOLOGY/PRINCIPAL FINDINGS: Following a high-fat diet (HFD) regimen, energy expenditure, measured using indirect calorimetry, was increased in HSL null mice. White adipose tissue of HSL null mice was characterized by reduced mass and reduced protein expression of PPARgamma, a key transcription factor in adipogenesis, and stearoyl-CoA desaturase 1, the expression of which is known to be positively correlated to the differentiation state of the adipocyte. The protein expression of uncoupling protein-1 (UCP-1), the highly specific marker of brown adipocytes, was increased 7-fold in white adipose tissue of HSL null mice compared to wildtype littermates. Transmission electron microscopy revealed an increase in the size of mitochondria of white adipocytes of HSL null mice. The mRNA expression of pRb and RIP140 was decreased in isolated white adipocytes, while the expression of UCP-1 and CPT1 was increased in HSL null mice compared to wildtype littermates. Basal oxygen consumption was increased almost 3-fold in white adipose tissue of HSL null mice and was accompanied by increased uncoupling activity. CONCLUSIONS: These data suggest that HSL is involved in the determination of white versus brown adipocytes during adipocyte differentiation The exact mechanism(s) underlying this novel role of HSL remains to be elucidated, but it seems clear that HSL is required to sustain normal expression levels of pRb and RIP140, which both promote differentiation into the white, rather than the brown, adipocyte lineage

Development and application of advanced electron microscopy techniques for materials in biological systems

Theoretically, electron microscopy and scanning probe microscopy offer information on a scale beyond the optical microscope. However, the quality of the micrograph and the obtained information is limited by the sample preparation. Each sample has its own characteristics that need special precautions, meaning that sample preparation is a continuously developing science. In this thesis several microscopy techniques are further developed and refined, and the problems involved are discussed both in general terms and more specifically for: Immunogold labelling of budded baculovirus, was performed to support the expression of a test protein, in a new display system for screening of proteins. Immunogold labelling was performed to locate hormone-sensitive lipase (HSL) within the beta cells in the islets of Langerhans. HSL was shown be located to the insulin storing granules. TEM was used to investigate the nature of the first precipitate formed in a solution designed to mimic the inorganic composition of the blood plasma of dialysis patients, i.e. with increased phosphate concentration. TEM and SEM were used to analyze the effects of modifying α-TCP, to be used as bone support material, by increasing milling time of the α-TCP particles or by substitution with silicon or strontium. SEM was used to put further light on release mechanisms for polymer coated pellets to be used in multiple-unit pharmaceutical devices. The possibility of correlative imaging by AFM, TEM and SEM of the exact same sample object was investigated on stained and unstained baculovirus. For further development of general microscopy protocols, different grid designs were investigated by SEM and commonly used treatment protocols, for modifying the hydrophilic properties of supports, were ranked by measuring the water contact angle on carbon after treatment. For cryo-TEM, the effect of adding a surface active stain to a virus-suspension on the frequency of virus particles in the vitrified film was evaluated by surface tension measurements

Chemical mapping of DNA and counter-ion content inside phage by energy-filtered TEM

Double-stranded DNA in many bacterial viruses (phage) is strongly confined, which results in internal genome pressures of tens of atmospheres. This pressure is strongly dependent on local ion concentration and distribution within the viral capsid. Here, we have used electron energy loss spectroscopy (EELS), energy-filtered TEM (EFTEM) and X-ray energy dispersive spectroscopy to provide such chemical information from the capsid and the phage tail through which DNA is injected into the cell. To achieve this, we have developed a method to prepare thin monolayers of self-supporting virus/buffer films, suitable for EELS and EFTEM analysis. The method is based on entrapment of virus particles at air-liquid interfaces; thus, the commonly used method of staining by heavy metal salts can be avoided, eliminating the risk for chemical artifacts. We found that Mg2 + concentration was approximately 2-4 times higher in the DNA-filled capsid than in the surrounding TM buffer (containing 10 mM Mg2 + ). Furthermore, we also analyzed the DNA content inside the phage tail by mapping phosphorus and magnesium

XEDS-mapping for explaining release patterns from single pellets

A common way to formulate controlled-release (CR) pharmaceuticals is to coat pellets of active substance with a polymer film, decrease the size of the pellets and distribute them as multiple-unit dosages in capsules. To increase the understanding of the release mechanism, the pellet shape and surface structure of pellets, before and after release in microtitre plates, have been studied by scanning electron microscope and X-ray energy-dispersive spectrometry. By performing these studies we associate release profiles during the first few hours to the microscopic structure. Pellets were divided into three classes (spherical pellets, dumbbell shaped pellets and twin-pellets) according to pellet form. Cases of burst release occurred for all three shape classes due to "open-window-defects" at the surface. Areas of thinner polymer film in the neck-region of dumbbell shaped pellets broaden the range of intermediate release rates for this pellet shape. The surface of twin pellets and dumbbell shaped pellets showed more defects, which increases the release rates in comparison to spherical pellets. All pellets with high release rates revealed ruptures in the polymer film, whereas only small cracks could be traced for pellets with slow release rates. The information gained is necessary for the development of future formulations and mathematical modelling of release patterns. The pharmaceutical used as model was remoxipride coated with a polymer film of ethyl cellulose and 10 wt.% triethyl citrate. (C) 2004 Elsevier B.V. All rights reserved

The effect of crystallinity on strength development of alpha-TCP bone substitutes.

Alpha phase tricalcium phosphates (alpha-TCP) were produced using a solid-state reaction method and milled for various periods of time. The resulting four materials were alpha-TCPs, ranging in crystalline content. Powders were exposed to X-ray diffraction for material identification as well as for use in crystallinity and purity calculations. Powder particle size was investigated using laser diffraction. Materials were mixed with 2.5% Na2HPO4 solution to initiate the hydration of alpha-TCP to calcium-deficient hydroxyapatite (CDHA). Isothermal calorimetry was performed to observe thermal response of the powders over a period of time. During the reaction process, at various time points up to 216 h, the material was compression tested to observe strength development. Materials proved to be predominantly alpha phase, while amorphous content determined by XRD varied. Reactivity, as measured by isothermal calorimetry, varied with crystallinity of the alpha-TCP powder. Speed of strength development did not change except for the most finely ground powder. In addition, crystal size of the CDHA was changed only in the product formed from the most highly ground material. It is proposed that increasing reactivity of alpha-TCP cements does not result in a corresponding increase in rate of strength development until there is sufficient supersaturation to produce significant crystal nucleation

Local and translational dynamics in DNA–lipid assemblies monitored by solid-state and diffusion NMR

AbstractThe influence of electrostatic interactions on the dynamic properties of complexes containing DNA and mixtures of cationic- (DDA) and zwitterionic (DLPC) lipids are studied by means of NMR. The systems are arranged in lamellar membrane stacks intercalated by DNA molecules. This is confirmed by 31P-NMR, where a superposition of an axially symmetric powder pattern arising from the phospholipid membrane and an asymmetric tensor due to DNA can be fitted to the experimentally observed lineshape. The local mobility and order is assessed using two solid-state NMR techniques applicable to samples with natural isotopic abundance: WIdeline SEparation (WISE) and Separated Local Field (SLF) spectroscopy. Both experiments yield highly resolved 13C spectra in the direct dimension. The indirect dimension contains information about molecular dynamics through the 1H dipolar linewidth (WISE) or the 1H–13C dipolar coupling constant (SLF). The experiments suggest that DNA is static while it induces an increased disorder in the hydrocarbon chains as compared to the parent lipid case. DDA chain order is more affected than DLPC due to the attractive electrostatic interaction between DNA and the cationic lipid. Translational dynamics of the lipids and the water was measured with the Pulsed Field Gradient STimulated Echo (PFG STE) technique. The influence of lamellar domain size and the angular dependence of the diffusion coefficients and nuclear relaxation times on the results of the PFG STE experiments are discussed. The local water diffusion coefficient is reduced by a factor four from the value of bulk water, and increases as the DLPC content is increased. We observe two lipid components with an order of magnitude difference in diffusion coefficients in the DNA:DDA:DLPC precipitate and these are assigned to DLPC (fast) and DDA (slow). Cationic lipid (DDA) diffusion is decreasing a factor of 2 when DLPC is added to the pure DNA:DDA system, indicating DNA-induced lipid segregation within the bilayer and the transition from locally 2D to 1D diffusion of the DDA. The results show that DNA–lipid electrostatic interactions reduce the long-range lipid mobility but locally enhance the hydrocarbon chain dynamics by perturbing the preferred lipid packing

Simulation of the release from a multiparticulate system validated by single pellet and dose release experiments

A previously described single-pellet release model has been simplified and modified to give predictions of the release from multiple-pellet systems, besides describing the release from single pellets. The simplified single-pellet model has been verified using single-pellet data and has been used to estimate three release-controlling parameters, namely the pellet core radius, the overall mass transfer coefficient, and the lag time. Single-pellet release experiments showed that the release from the individual film-coated drug cores resulted in a wide distribution of release profiles, a phenomenon not observed on the dose level. Therefore, the parameter estimations resulted in distributions of these parameter values. The core radius and the lag times compared well with the experimental data. The distributions were used as input data for the multiple pellet model, in order to predict the release profiles on the dose level, showing results consistent with the measured dose release. The dose-predictive ability of the model was demonstrated in simulations by studying the effect of a change in the size of the single subunits (of constant total dose), showing that smaller pellets give an increased release rate with less variation. The model for predicting dose-release profiles could be of great value in optimising the performance of an existing formulation, as well as in the development of a new control led-release pharmaceutical. (C) 2004 Elsevier B.V. All rights reserved

Hormone-sensitive lipase is necessary for normal mobilization of lipids during sub-maximal exercise.

For the working muscle there are a number of fuels available for oxidative metabolism, including glycogen, glucose and non-esterified fatty acids. Non-esterified fatty acids originate from lipolysis in white adipose tissue, from hydrolysis of VLDL-triglycerides or from hydrolysis of intramyocellular triglyceride stores. A key enzyme in the mobilization of fatty acids from intracellular lipid stores is hormone-sensitive lipase (HSL). The aim of the present study was to investigate the metabolic response of HSL-null mice challenged with exercise or fasting and to examine if other lipases are able to fully compensate for the lack of HSL. The results showed that HSL-null mice have reduced capacity to perform aerobic exercise. The liver glycogen stores were more rapidly depleted in HSL-null mice during treadmill exercise and HSL-null mice had reduced plasma concentrations of both glycerol and non-esterified fatty acids after exercise and fasting, respectively. The data support the hypothesis that in the absence of HSL mice are not able to respond to an exercise challenge with increased mobilization of the lipid stores. Consequently, the impact of the lipid sparing effect on liver glycogen will be reduced in the HSL-null mice, resulting in faster depletion of this energy source, contributing to the decreased endurance during sub-maximal exercise. Key words: Treadmill exercise, lipid metabolism, glycogen, skeletal muscle, liver

Subcellular distribution of spermidine/spermine N(1)-acetyltransferase

The subcellular distribution of the polyamine catabolic enzyme spermidine/spermine N(1)-acetyltransferase (SSAT) was studied in L56Br-C1 cells treated with 10muM N(1),N(11)-diethylnorspermine (DENSPM) for 24h. Cells were fractioned into three subcellular fractions. A particulate fraction containing the mitochondria was denoted as the mitochondrial fraction. After DENSPM treatment, an increase in SSAT activity was mainly found in the mitochondrial fraction. Western blot analysis showed an increased level of the SSAT protein in the mitochondrial fraction compared to the cytosolic fraction. Immunofluorescence microscopy and immunogold labeling transmission electron microscopy also showed a mitochondrial association of SSAT. Transmission electron microscopy revealed that the endoplasmic reticulum was devoid of ribosomes in DENSPM-treated cells, in contrast to control cells that contained ample ribosomes. An increased SSAT activity in connection with the mitochondria may be part of the mechanism of DENSPM-induced apoptosis